Tenang saja ada sedikit tips buat anda para pengguna linux yang ingin koneksi internet nya
Menjadi cepat.
Sistem kerjanya yaitu mengoptimalkan kecepatan reload data saat kita berinternet.
Nah ini dia tips nya jangan lupa di simak baik-baik.
1. Buka terminal linux dan ketik perintah
Jika anda tidak punya teks editor leafpad bisa di ganti dengan teks editor bawaan anda misalkan gedit.
2. Jika sudah terbuka leafpad atau teks editor yang lainya, copy dan paste code
Di bawah ini di bawah sendiri.
3. Dan sekarang kita akan meng apply code yang kita copy dan paste tadi.
Jika sudah silakan di review sendiri.
Good luck!! selamat mencoba!!
Nah ini dia tips nya jangan lupa di simak baik-baik.
1. Buka terminal linux dan ketik perintah
┌─[root@parrot]
└──╼ #sudo leafpad /etc/sysctl.conf
└──╼ #sudo leafpad /etc/sysctl.conf
Jika anda tidak punya teks editor leafpad bisa di ganti dengan teks editor bawaan anda misalkan gedit.
2. Jika sudah terbuka leafpad atau teks editor yang lainya, copy dan paste code
Di bawah ini di bawah sendiri.
# increase TCP max buffer size setable using setsockopt()
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
# increase Linux autotuning TCP buffer limits
# min, default, and max number of bytes to use
# set max to at least 4MB, or higher if you use very high BDP paths
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
# don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
# recommended to increase this for 1000 BT or higher
net.core.netdev_max_backlog = 2500
# for 10 GigE, use this, uncomment below
# net.core.netdev_max_backlog = 30000
# Turn off timestamps if you're on a gigabit or very busy network
# Having it off is one less thing the IP stack needs to work on
#net.ipv4.tcp_timestamps = 0
# disable tcp selective acknowledgements.
net.ipv4.tcp_sack = 0
#enable window scaling
net.ipv4.tcp_window_scaling = 1
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
# increase Linux autotuning TCP buffer limits
# min, default, and max number of bytes to use
# set max to at least 4MB, or higher if you use very high BDP paths
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
# don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
# recommended to increase this for 1000 BT or higher
net.core.netdev_max_backlog = 2500
# for 10 GigE, use this, uncomment below
# net.core.netdev_max_backlog = 30000
# Turn off timestamps if you're on a gigabit or very busy network
# Having it off is one less thing the IP stack needs to work on
#net.ipv4.tcp_timestamps = 0
# disable tcp selective acknowledgements.
net.ipv4.tcp_sack = 0
#enable window scaling
net.ipv4.tcp_window_scaling = 1
3. Dan sekarang kita akan meng apply code yang kita copy dan paste tadi.
┌─[root@parrot]
└──╼ #sudo sysctl -p
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
net.core.netdev_max_backlog = 2500
net.ipv4.tcp_sack = 0
net.ipv4.tcp_window_scaling = 1
└──╼ #sudo sysctl -p
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
net.core.netdev_max_backlog = 2500
net.ipv4.tcp_sack = 0
net.ipv4.tcp_window_scaling = 1
Jika sudah silakan di review sendiri.
Good luck!! selamat mencoba!!
0 komentar